美國340億美元關稅加征清單第三批排除產品目錄

美國稅號

具體排除產品

具體排除產品

（英文版）

（中文參考版）

8413.19.0000

Pumps designed for countertop appliances for serving beer, the foregoing that control the level of carbonation by means of sonic waves

為供應啤酒的臺面裝置而設計的、通過聲波控制碳化程度的泵

8420.10.9080

Roller machines designed for cutting, etching or embossing paper, foil or fabric, manually powered 

設計用于剪切、蝕刻或壓紋紙、箔或手動供電的織物

8421.21.0000

Water oxidizers and chlorinators

水氧化劑和加氯器

8425.39.0100

Ratchet winches designed for use with textile fabric strapping

設計用于織物捆扎的棘輪絞車

8428.33.0000

Continuous action elevators and conveyors, designed to convey mineral materials

為輸送礦物而設計的連續式提升機和輸送機

8431.20.0000

Counterweight castings of iron or steel designed for use on fork lift and other works trucks

設計用于叉車和其他載貨汽車的鋼鐵對重鑄件

Tines, carriages, and other goods handling apparatus and parts designed for use on fork lift and other works trucks 

設計用于叉車和其他載貨汽車的耙齒、車廂和其他貨物裝卸設備及部件

8466.93.9885

Parts of drill sharpening machines

磨刀機零件

8479.90.9496

Outer shells of hydraulic accumulators, of iron or non-alloy steel, cylindrical with hemispherical heads on each end

液壓蓄能器的外殼，由鐵或非合金鋼制成，兩端帶半球形頭的圓柱形

Parts of mechanical awnings and shades

機械遮篷和遮陽簾的部分

Reject doors, pin protectors, liners, front walls,grates,hammers, rotor and end disc caps, and anvil and breaker bars, of iron or steel, the foregoing parts of metal shredders

鐵或鋼制的拒收門、銷保護器、襯墊、前壁、格柵、錘子、轉子和端盤蓋、砧桿和破碎桿，以及金屬粉碎機的上述部分

Steering wheels designed for watercraft, of stainless steel, having a wheel diameter exceeding 27 em but not exceeding 78 em 

為船艇設計的、車輪直徑超過27em但不超過78em的不銹鋼制方向盤

8481.10.0090

Pressure regulators of brass or bronze, whether high or low inlet type, having a rated flow rate of 55,000 - 150,000 BTU/hr, maximum inlet pressure of 0.17 MPa to 1.72 MPa, inlet connection with POL or thread type of fitting

黃銅或青銅壓力調節器，無論是高進口型還是低進口型，額定流量為55000-150000 BTU/hr，最大進口壓力為0.17 MPa至1.72 MPa，帶POL或螺紋接頭的入口連接

8481.90.9040

Pipe brackets of aluminum, each with 4 ports, the foregoing measuring 27.9 em x 20.3 em x 17.8 em and weighing 11.34 kg, designed for installation into air brake control valves

鋁制管支架，每個管支架有4個端口，上述尺寸為27.9 em x 20.3 em x 17.8 em，重量為11.34 kg，設計用于安裝到空氣制動控制閥中

Push pins and C-poles of steel, designed for use in variable force solenoid valves

設計用于可變作用力電磁閥的鋼制推桿和C形桿

8482.10.5032

Ball bearings of a width not exceeding 30 mm

寬度不超過30 mm的滾珠軸承

8504.90.9690

Inductor baseplates of aluminum, each with a length measuring 149.20 mm or more but not over 275 mm, with a width measuring 119.40 mm or more but not over 232 mm and with a depth of 10.50 mm or more but not over 19 mm,with a weight of0.48 kg or more but not over 3.2 kg

鋁制電感器底板，長度為149.20 mm或大于等于275 mm，寬度為119.40 mm或以上，但不超過232 mm，深度為10.50 mm或以上，但不超過19 mm，重量為0.48 kg或以上，但不超過3.2 kg

8515.90.4000

Parts of soldering irons and soldering machines

烙鐵和焊接機的零件

8536.50.9065

Motor vehicle gear shift switch assemblies, comprised of a plunger, connector and gear shift lever

機動車輛換檔開關總成，包括柱塞、連接器和換檔桿

Pressure switches designed for use in heat pumps and air-conditioning condensers having a rating of 1.90 megapascals or more but not over 4.55 megapascals

為熱泵和空調冷凝器設計的壓力開關，額定值為1.90兆帕或以上但不超過4.55兆帕

9030.33.3800

Instruments for measuring or checking voltage or electrical connections;electrical circuit tracers

測量、檢查電壓或者電氣連接的儀器；電路跟蹤器